Stationary Lighted Unit
(Refer to drawing WC-81-16)
| Part # | Description |
| Lighted 17’-0” Aluminum Stationary Pole Type “A” Swivel, Lampholder, and Structural “C” Condulet | |
| 12-0 | with windcone 18” Dia. |
| 12-1 | with windcone 24” Dia. |
| 12-2 | with windcone 36” Dia. |
* Fabric windsock and anchor bolt sets extra.
Basic Lighted Unit with Tilt Pole
(Refer to drawings WC-81-13 and WC-81-10)
This is our most popular unit. It is specified by Transport Canada and tested to a wind factor of 100 mph.
Manufactured from heavy gauge sched 80 aluminum, flanged base, plug-welded where required for strength. Galvanized anchor bolts are placed on 10” centers. A stationary pivot pin and a sand filled counter-weight tank easily allow one person to lower the top section for servicing lamps and windsocks.
Weight: 140 lbs. (20 cu. ft.). Height: 20’x3”. Shipped in 3 pieces.
| Part # | Description |
| 18’-9” aluminum counter-weighted drop-pole Type “A” Swivel, Lampholder, and Structural “C” Condulet On/off switch in enclosure | |
| 12-4 | with windcone 18” Dia. |
| 12-5 | with windcone 24” Dia. |
| 12-6 | with windcone 36” Dia. |
*Fabric windsock and anchor bolts extra. Extra options available for this unit.
Constant Brightness Lighted Unit with Tilt Pole
(Refer to drawings WC-81-12 Rev. 2 and WC-81-10)
Provides maintained voltage for constant brightness as required in locations that have series lighting. This is the Basic Unit described above, fitted with a Constant Voltage Transformer made for windcones.
Weight: 180 lbs. (22.5 cu. ft.) Shipped in 4 pieces
| Part # | Description |
| 12-7 | As per Basic Lighted Unit above (12-6) with 36” Dia. windcone and Converter-Transformer |
*Fabric windsock and anchor bolts extra. Extra electrical options limited with this unit. Optional Constant Brightness 6.6 amp 100 w Halogen PK30 system available
Wall-Mounted Lighted Unit
| Part # | Description |
| 14’-6” pole with brackets Type “A” Swivel, Electric Fittings and Hardware | |
| 19-1 | with windcone 18” Dia. |
| 19-2 | with windcone 24” Dia |
Stationary Non-lighted Unit
(Refer to drawing WC-64-13)
| Part # | Description |
| 17’-0” aluminum pole in two sections with heavy flange base Type “B” swivel | |
| 11-0 | with windcone 18” Dia |
| 11-1 | with windcone 24” Dia |
| 11-2 | with windcone 36” Dia |
* Fabric windsocks and anchor bolts not included.
Tilt-Pole Non-lighted Unit
(Refer to drawing WC-81-13 Rev. 9)
| Part # | Description |
| 18’-9” counter-weighted aluminum drop-pole Type “B” swivel | |
| 11-4 | with windcone 18” Dia |
| 11-5 | with windcone 24” Dia |
| 11-6 | with windcone 36” Dia |
* Fabric windsocks and anchor bolts not included